DEDW model Dishwasher Error codes
Dishwasher Error Codes: Error Code Problem Action E1 Water Flow Check the setting of the cold water tap. If problem
Can I extend the inlet pipe?
If the dishwasher is fitted with an AquaStop* then no this is not possible. * To avoid the risks of leaking and
Can the dishwasher be connected to the hot water?
The dishwasher is designed to be connected to the cold water connection only.
What is the recommended water pressure?
Water pressure must be between 0.04 MPa and 1 MPa.
Can I extend the drain hose?
If you need a drain hose extension, make sure to use a similar drain hose. It must be no longer
Water marks left at the end of the cycle.
Check that the dishwasher is not overloaded. Try increasing the Rinse Aid setting. Check that the Rinse Aid dispenser is
The detergent wasn’t dispensed during wash cycle.
Please dry the dispenser before loading to prevent caking.
Dishes are not dry at the end of the cycle.
Check that the Rinse Aid dispenser is filled. Try increasing the Rinse Aid setting. Wrong wash programme is been used.
Dishes are not clean at the end of the cycle.
Check that the wash programme is suitable for the load. Scrape off excess food from dinnerware before loading. Check that
Knocking noise in the water pipes
Most likely an installation issue. Contact a qualified plumber.